General Finishes Enduro Water Based 2K Conversion Varnish
SKU
GFCV-conf
Conversion Varnish is the latest addition to our professional water based product line. It is a two component post catalyzed urethane topcoat suitable for bar tops and commercial applications where ultimate durability is necessary. General Finishes Conversion Varnish has a 6-8 hour pot life once catalyzed and can be re-coated in 1-2 hours.
Made in USA
- Requires NCO Catalyst - 13 ounces per gallon
- Spray on application only
- Tip sizes recommended: Compressed Air .040, HVLP_ .043-.051, Airless .009-.013 Air caps should be medium size
- Extender: adds more open time. Accelerator: quickens dry time
- Passes KCMA standards
- VOC < 200 g/l (1.75 lbs/gal) excluding water
- 3 coats - additional coats can be applied depending on use
- Recoat: 1-2 hours
- Coverage: 450-500 sq. ft/gal
- USGBC LEED EQ 4.2
- Low VOC
- Non Flammable
- Water clean up
- No odor
Manufacturer | General Finishes |
---|---|
Length | 0 |
Product Badges | Made in USA |
Monthly Special | No |
Write Your Own Review