403 Forbidden
ERR_WEB_NGX_403
General Finishes Oil Based Arm-R-Seal Top Coat
SKU
GFARM-conf
Arm-R-Seal topcoats are made with only the highest quality urethane resin, making them extremely durable and long lasting. They are formulated to be wiped on with a cloth or applied with a foam brush, thus eliminating drips and sags. They penetrate to provide deep down protection and that "natural" look.
General Finishes Oil Based Gallons are not available in the following states due to V.O.C. restrictions. You can still purchase any amount of smaller containers e.g. 4 quarts.
- California
- Connecticut
- Rhode Island
- Maine
- Massachusetts
- New Hampshire
- Vermont
- Delaware
- District of Columbia
- Maryland
- New Jersey
- New York
- Virgina
- Pennsylvania
- Arizona
- Ohio
- Illinois
- Indiana
Made in USA
- Can also be used over Danish Oil
- Linseed Oil & Tung Oil once they are completely dry
- Warm amber tone. This finish will continue to darken over time
- For best results use hand application
- Minimum 3 coats, additional coats can be applied
- VOC: < 575grams/liter
- Coverage: 200 sq. ft/qt
- Dry time to touch: 1-2 hours
- Dry time to recoat: 12-24 hours. Allow more dry time if it is humid
- Dry time for light use: 7 days
- Cure time: 30 days under ideal conditions (70 degrees & 70% humidity)
- Cure time is the amount of time needed for the finish on a piece to reach maximum hardness and be ready for normal use
- Applicator Cleanup: Mineral Spirits
- Freeze / thaw stable
- Do not use tack cloths which contain linseed oils
| Manufacturer | General Finishes |
|---|---|
| Length | 0 |
| Product Badges | Made in USA |
| Monthly Special | No |
Write Your Own Review
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.