General Finishes Water Based Clear Poly
SKU
GFP-conf
Enduro Clear Poly Topcoat is a self crosslinking polyurethane that dries water white. Clear Poly can be used on any project where more solids (28%) and durability are desired.
Made in USA
- Spray on application only
- Recommended Accuspray HVLP atomizing sets: .043 -.051 tip and nozzle, No. 9 -10 air cap
- For optimal performance and appearance sanding sealer should be used
- Passes KCMA standards
- VOC < 215 g/l (2.17 lbs/gal) excluding water
- Dry: 10 - 30 minutes
- To sand: 30 minutes - 2 hours
- USGBC LEED EQ 4.2
- Low VOC
- Non Flammable
- Water clean up
- No odor
- Caution: Do not use any type of clear topcoat over Snow White Milk Paint or Chalk White, as it may cause yellowing. If added protection is desired, spray with White Poly.
| Manufacturer | General Finishes |
|---|---|
| Length | 0 |
| Product Badges | Made in USA |
| Monthly Special | No |
Write Your Own Review