Kampel SeamFil
The “ORIGINAL” laminate repair.
Repair nicks, fill seams and make gouges disappear with this one-part system. SeamFil bonds mechanically to the substrate of laminate and dries hard, becoming a permanent part of the laminate surface. SeamFil also resists moisture, detergents, and other household products as effectively as the original laminate.
Typical applications for this product are filling standard joints, cracks, chips and other imperfections where the dark substrate is visible. Properly used, custom colored SeamFil will hide defects beautifully for the life of the counter.
- 1 oz squeeze tube
- SeamFil is a single part, solvent based repair system for high pressure laminated surfaces. It will cure in approximately one hour, but we recommend 24 hours for total cure. KSF99 Solvent is the ONLY recommended solvent for use with SeamFil.
- One (one ounce tube of SeamFil) will approximately fill an 8 foot Seam of Counter with an 1/8" bead. If the seam is wider than 1/16" (but should never be larger than 1/8") a second application will probably be necessary. It can be used to fill an area that is no longer than 1/4" in diameter.
- SeamFil dries to a matte finish. To obtain a Glossy Finish, K943 Clear Gloss should be added.
- To increase the cure time of SeamFil, K944 SeamFil Retarder can be added to the mix.
- SeamFil can be successfully removed by KSF99 Solvent before or after it dries, regardless of the amount of time passed.
- SeamFil is NOT recommended for use on Solid Surface materials. ColorFlex and ColorFlex II are used for Solid Surfaces.
- See product attachments for the color matching guide.
FAA prohibits air shipments of these products. ORM-D products must be shipped ground transportation.
| Manufacturer | Kampel |
|---|---|
| Product Badges | Made in USA |
| Type | Laminate Repair |
| Monthly Special | No |
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
